-
GASOLINE HOSE
Internal hose Synthetic rubber resistant to petrol and diesel fuel, extruded whole without joints, of uniform thickness. Anti-static electricity:R < 1MΩ Covering Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Anti-static electricity:R < 1MΩ Size 5/8” 3/4” 1” Working pressure 180bar Lenght 50mb etc Weight 0.59–0.93kg/m Reinforcement 1 steel wire braid. Working Pressure 20Bar / 290Psi Description Fuel hose is a problem under actual working condi... -
WELDING HOSE
Rubber Twin Welding Hose is a premium welding hose, Green hose for Oxyen Red hose for Acetylene, Heat resistant EPDM tube and cover 2 spiral polyester yarn reinforcement, more flexible than braid reinforced hose, easier to coil and handle, Coiled coupled assemblies are available in 25 and 50 foot lengths. It can be used with most current fuel gases, including acetylene, propane, and MAPP gas. Rubber Twin Welding Hose Construction: Tube: Black, smooth, synthetic rubber Size: 3/16”-1/2” Working... -
STEAM HOSE
Steam Hose Construction: Tube: Synthetic rubber EPDM Reinforcement: high tensile wire braiding Size: 3/8”–1 1/4” Working pressure: 10bar/20bar Lenght: 20m/50m Material: EPDM Color: red ,black Cover: Red or blue, pin pricked smooth (wrapped finish), EPDM rubber Steam Hose Application: The steam hose is used for the saturated steam in chemical industry, petroleum industry, shipbuilding industry EPDM Steam Hose Characteristic: Excellent resistance to high temperature Weathering and ozoen r... -
SMOOTHWRAPPED COVER FUELOIL HOSE
Smooth/ wrapped oil hose is widely used in Automotive & Industrial applications requiring chemical resistance. Recommended for transfer of aromatic or non aromatic hydrocarbon fluids. Typical applications include fuel and lubricant transfer, gas transmission lines, gasoline and petrochemical pipes. It has good general industrial properties, although aging is poor when submitted to light and ozone. Nitrile Fuel Hose Construction: Tube: Black, smooth, NBR rubber. Reinforcement: High strengt... -
SMOOTH WRAPPED COVER AIRWATER HOSE
Smooth/ wrapped Air Hose/ Water Hose is mainly used as the connector between air compressor and other device. It is widely used in underwater diving, for example scuba diving. It is an important part of diving dress and other types of surface supplied diving equipment. In the other hand, air hoses can be used for air brakes between tractors and semi-trailers. It is composed of three parts: tube, reinforcement and cover. The tube is made from high quality black and smooth synthetic rubber, mai... -
PLASTIC HOSE GUARD
Construction: MaterialPP (Polypropylene) Characteristic: ● Resistant to acids, oils and solvents ● Flexible ● UV resistance ● Excellent for use in temperature range from -50°C up to +80°C (continuous) / 100°C (short time) ● Protect hose increases usable life of hose Recyclable Size: 8mm-115mm Working pressure: 20bar Lenght: 2m/50m/100m Material: PP(Polypropylene) Color: red, black Spiral Hose Guard Temperature: -50℃ (-122 ℉ ) to +80℃ (+176 ℉ ) Application: The use of spiral hose guard is an e... -
GOST 7 SANDBLAST HOSE
Russia Standard: ГОСТ 18698-79 —Ш(VIII) Size: 25mm-65mm Working pressure: 12/16bar Lenght: 20m/40m/60m Type: ГОСТ 18698-79 —Ш(VIII) Color: black Applications: For abrasives (sand from the blasting) and slightly acidic or slightly alkaline solutions for plastering and painting works. Temperature range: To +80°С Диаметр (внутр.), мм Диаметр (наружн.), мм Давление, МПа Класс Длина, м ID , mm OD,mm Pressure, Mpa Type Length , m 25 39;40 1.2;1.6 Ш ... -
GOST 6 OIL SUCTION &DISCHARGE HOSE
CONSTRUCTION: Inner rubber ayer, fabric cloth layer and outer rubber layer Size: 25-203mm Working pressure: 6bar/10bar Lenght: 4-60m Type:ГОСТ 5398-76 Б APPLICATIONS: This hose is suitable for sucking and discharging water or general neutral liquid for mine, factory, construction and conservancy engineering. SIZE I.D W.P Size of soft joint Length 6BAR 10BAR Length Tolerance m Tolerance mm Min Max Layers mm mm mm 25 23.8 26.2 2 2 100 ±1... -
GOST 5 WATER SUCTION &DISCHARGE HOSE
CONSTRUCTION: Inner rubber ayer, fabric cloth layer and outer rubber layer APPLICATIONS: This hose is suitable for sucking and discharging water or general neutral liquid for mine, factory, construction and conservancy engineering. Size: 25-152mm Working pressure: 6bar/10bar Lenght: 4-60m Type: 5398-76 B Color: red ,black Rubber Water discharge hoses Features: Weathering and ozone resistant. Flexible and high working pressure Excellent for tough working conditions SIZE I.D W.P Size ... -
GOST 4 STEAM HOSE WITH FABRIC INSERT ГОСТ 18698-79
Russia Standard: ГОСТ 18698-79 — ПАР-1 (x) ; ПАР-2 (x) Applications: Steam Hose Size: 16mm-50mm Working pressure: 3bar/8bar Lenght: 20m/40m Type: ГОСТ 18698-79 — ПАР-1 (x) ; ПАР-2 (x) Color: black Temperature range: ПАР-1 (x) to +143°С , ПАР-2 (x) to +175°С Диаметр (внутр.), мм Диаметр (наружн.), мм Давление, МПа Класс Длина, м ID , mm OD,mm Pressure, Mpa Type Length , m 16 28 0.3 пар 1 20/40 18 30 0.3 пар 1 20/40 25 46 0... -
GOST 3 HOT WATER HOSE WITH FABRIC INSERT ГОСТ 18698-79
Russia Standard: ГОСТ 18698-79 — В(II) , Г(IV) Size: 12-100mm Working pressure: 6bar/8bar/10bar Lenght: 10m/20m/40m Type:В(II) , Г(IV) Applications: ГОСТ 18698-79 — В(II) is for water , solutions of inorganic acids and alkali concentration up to 20% (except nitric acid). ГОСТ 18698-79 — Г(IV) is for air, carbon dioxide and other inert gases Temperature range : From -30℃ to +80 ℃ Диаметр (внутр.), мм Диаметр (наружн.), мм Давление, МПа Класс Длина, м ID , ... -
GOST 2 OIL HOSE WITH FABRIC INSERT ГОСТ 10362-76
Russia Standard: ГОСТ 10362 Size: 12-75mm Working pressure: 6bar/8bar/10bar Lenght: 20m/40m Type:Б Applications: For gasoline, kerosene, mineral oils, petroleum-based Temperature range : From -30℃ to +70 ℃ Диаметр (внутр.), мм Диаметр (наружн.), мм Давление, МПа Класс Длина, м ID , mm OD,mm Pressure, Mpa Type Length , m 12 23 0.6;0.8;1.0 Б 20; 40 16 27 0.6;0.8;1.0 Б 20; 40 18 29 0.6;0.8;1.0 Б 20; 40 20 31 0.6;0.8;1.0 Б ...
Hello, come to consult our products !
