TUSHEN SINADARI
Gina bututun sinadarai:
Bututu:XLPE mai haske (polyethylene mai haɗin giciye)
Girman:3/4”–4”
Matsi na aiki:mashaya 10
Tsawon:20m/40m/60m
Nauyi:0.67–5.06kg/m
Launi:Shuɗi, Kore
Ƙarfafawa:Igiyoyin yadi masu ƙarfi tare da/ba tare da wayoyi masu sassauƙa guda 4 na ƙarfe masu sassauƙa ba
Murfi:EPDM mai kore - Juriya ga Abrasion da Ozone
Aikace-aikacen bututun sinadarai:
An ƙera shi don amfani a cikin injina ko tanki don canja wurin sinadarai da abubuwan narkewa.
Zafin Tiyo na Sinadarai:
-40 ℃ zuwa +120 ℃((-72℉ zuwa +248℉)
Sinadarin tiyo:
●Mayar da sinadarai/acid
● Murfin EPDM mai jure zafi, yanayi, da kuma bushewa
● Murfin da aka yi da corrugated yana sa tiyo ya fi sassauƙa
Bayani dalla-dalla:
| LAMBAR SASHE | Girman tiyo | OD | MATSI A MATSAYIN AIKI | TSANANI MATSIN MATSI | BEND RASIUS | Nauyi | TSAYIN KOWANNE KWAMFUTA | |||||||
| ID | DN | MN | INCI | MM | mashaya | PSI | mashaya | PSI | MM | KGS/M | MA'AUNI | |||
| SPI-19 | -12 | 19.00 | 3/4” | 31.00 | 10 | 150 | 30 | 450 | 150 | 0.67 | 20/40/60 | |||
| SPI-25 | -16 | 25.40 | 1” | 37.00 | 10 | 150 | 30 | 450 | 200 | .084 | 20/40/60 | |||
| SPI-32 | -20 | 31.80 | 1 1/4” | 45.00 | 10 | 150 | 30 | 450 | 250 | 1.20 | 20/40/60 | |||
| SPI-38 | -24 | 38.10 | 1 1/2” | 52.00 | 10 | 150 | 30 | 450 | 300 | 1.52 | 20/40/60 | |||
| SPI-50 | -32 | 51.00 | 2” | 65.00 | 10 | 150 | 30 | 450 | 350 | 1.96 | 20/40/60 | |||
| SPI-65 | -40 | 63.50 | 2 1/2” | 80.00 | 10 | 150 | 30 | 450 | 400 | 2.95 | 20/40/60 | |||
| SPI-76 | -48 | 76.20 | 3” | 92.00 | 10 | 150 | 30 | 450 | 450 | 3.44 | 20/40/60 | |||
| SPI-100 | -64 | 102.00 | 4” | 120.00 | 10 | 150 | 30 | 450 | 500 | 5.06 | 20/40/60 | |||
Isarwa
HYRUBBERS sun gina ingantaccen aikin sufuri. Ana iya isar da bututun roba ga abokan ciniki ta hanyar teku, ta jirgin sama, ko ta hanyar sufuri ta manyan hanyoyi, don tabbatar da cewa abokan ciniki sun sami bututun roba a kan lokaci.
